Blow Tie Spunding Valve We wouldnt recommend a pump

We wouldnt recommend a pump too small as you need a reasonably powerful pump to push the water through the condenser as there is a lot of flow restriction in the condenser head

This iconic vee shape still has been created to capture the vital esters

These 304 Stainless 2200w Weld-Less Elements are designed to fit a 32mm Hole inside the wall of your brewing vessels or boilers

Spare silicone seals can be purchased here These weldless elements are designed to fit a 32mm hole in the wall of your brewing vessel or boiler

If you would like to have a completely removable fitted kit we would suggest using EVABarrier 4mm ID or 5mm ID hose as the joining pieces

Blow Tie Spunding Valve We wouldnt recommend a pumpThe Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately you need a way to release excess